Nanolex SI3D 50ml

Rp 900.000

NANOLEX SI3D.

is extremely weather and chemical resistant.

Which in turn provides excellent corrosion protection with easy to clean properties.

Si3D can also increase the total hardness of the paint to up to 9H+.

Adding a clear coat with a color darkening effect to the treated surface.

Depending on the number of applied layers of Si3D, the thickness of the coating can vary.

 

The coating thickness, combined with the sophisticated structural nature of the Si3D matrix, make the coating resistant to abrasion caused by frequent washing and also unaffected by most chemical substances.

 

An important part of automomotive coatings are solvents.

The liquid consistency, viscosity and volatility of the product is highly dependent on the used solvents.

Nanolex Car Care do not incorporate any aromatic solvents in their product formulations, due to the high potential of hazardous to health character, thus making them safe use in an enclosed environment.

Nanolex Si3D

IMPORTANT: Before you use a Nanolex Car Care product please make sure you wear suitable protection gear we always recommend to use Nitril gloves to make sure your hands are protected from any possible damage to your skin.

Consumption:

Sealant: appr. 6ml/m2 (~50 ml for paint + alloys)

Processing temperature: 5-30°C - Avoid direct sunlight and/or high air humidity.

1.1 Nanolex Si3D can be applied directly to all clear-coated (lacquered) surfaces. The lacquer surface must be dry and free of any contamination or dust. 

We always recommend to use Nitril gloves to make sure your hands are protected from any possible damage to your skin. 

Consumption:

Sealant: appr. 6ml/m2 (~50 ml for paint + alloys)

Processing temperature: 5-30°C - Avoid direct sunlight and/or high air humidity.

1.1 Nanolex Si3D can be applied directly to all clear-coated (lacquered) surfaces. The lacquer surface must be dry and free of any contamination or dust. We strongly recommend to use Nanolex EX directly before the application to make sure that all oils/fillers and other dirt are removed completely from the surface. Use Nanolex microfiber towels and turn or exchange cloth frequently during cleaning/polishing.

1.2 If the car was machine polished before the application it is absolutely necessary to remove any (mostly invisible) fillers and oils if those are not removed a white or grey hazing will appear on the paint once Si3D was applied. The paint sealant layer itself is too thin to be visible and can easily buffed off only fillers and oils will become visible. We recommend to wash the car with Nanolex PreWash after the paint was machine polished to safely remove the majority of the contamination.

2. Shake bottle before use! Spread 5-10 drops/m2 of Nanolex Si3D on a microfiber applicator pad and apply it sparingly by rubbing in with light pressure in criss-cross motions. Remove the coating residue with a soft microfiber cloth after a maximum of 3 minutes. There is no pressure necessary to remove it completely.

3. Let Nanolex Si3D cure on the surface for at least 12 hours (at ambient temperature, assuming 20°C) before the first water contact.
Do not wash the car within the first 72 hours.

Curing time depending on temperature:

@50°C: 3-4 hours @80°C: 2 hours 


IMPORTANT NOTICE :
* Ingin informasi cepat? Hubungi kami di 081 927 988 999 ; 031 9188 0088 ; BB PIN 261477E7.
Website developed by Visigraphic jasa pembuatan toko online jasa pembuatan website jasa pembuatan website surabaya